All content on this site is my sole creative property and may not be reproduced. If you would like to feature, pin or otherwise refer to content of mine, thank you! Please clearly link back to 'A Nest for All Seasons' and only use up to two photographs. To purchase content, please e-mail me for rates and restrictions. Posts may contain affiliate links for trusted products. I receive a small percentage of sales when you purchase from these sites.
2014fallWoodCarved Magnets2014fallFootprints2014fallLED-luminaries2014fallCharcoalProfileCanvas

12 June 2014

Pink Leather Earrings ::: A Little Punk, A Little Girly

Pin It

Good morning everyone!  I am back in Pennsylvania from a fun vacation to Costa Rica and Florida and am enjoying HOME so very much.  Many posts on the flora and fauna of Costa Rica, packing and traveling with 4 young kids internationally and why HOME is so wonderful coming up soon!

In addition, I have a slew of home projects, DIY ideas and crafting activities coming this summer.  For now, I have a fun leather craft to share with you!  Leather is one of my very favorite materials to work with and I am in love with the tassels that have been showing up everywhere from clothing to accessories and in more streamlined forms in home decor.  When I stumbled upon a large, pink leather, full-length skirt for a few dollars at the thrift store, I knew exactly what I wanted to make.

Portions of this post have been previously published on Crafts Unleashed.

Feminine, a little punk and simple to make.  Let's dive right in, shall we?

Supplies Needed:

Leather Tassel Earrings cutting tools

To DIY the tassel:

If you want to skip a couple of steps, I am listed the supplies for a "Half DIY" below.  You will still be connecting pieces, but skip the actual tassel-making part.

To HALF DIY:

tassels



You will need one jump ring and some sort of earring finding, either a fishhook or leverback works great!  I went ahead and bought this findings kit that is nickel free for about $7.00.  If you don't have sensitive ears, you can pick up findings kits even cheaper.  (Case in point, this kit is only$3.57)  You will also need these end crimps if you are DIYing the earring from scratch.

Tassel Earring for Crafts Unleashed by Amy Renea Supplies Needed

Let's start with the leather though...

Leather Tassel Earrings cutting


Step 1: Cut out a small square of leather.  The longer the length, the longer your tassel.  
The width should only be about 1-2" to fit into the small jewelry hardware.

Tassel Earring for Crafts Unleashed by Amy Renea Cutting

Step 2: Using SHARP fabric scissors, cut small strips about 3/4 to 5/6 of the way up the leather piece.
  Leave a solid, uncut portion at the top.  Once you have a fringe, you can add more texture by snipping the ends off randomly at an angle (See below).

Tassel Earring for Crafts Unleashed by Amy Renea Making Fringe


Step 3: Add a tiny dot of glue to one end of the leather piece.

Tassel Earring for Crafts Unleashed by Amy Renea Tassel

Step 4: Roll it up as tight as you can and secure with another tiny dab of glue.  
The glue WILL discolor the leather, so make sure you use a tiny bit and keep it on the inside of your roll.  
Hold the roll closed for a minute or so until the glue has dried enough to keep it held tight.

Tassel Earring for Crafts Unleashed by Amy Renea glue

Step 5: Now it is time to add your hardware.  Take one of your large rectangular endcaps, 
open it slightly with jewelry pliers and place it on the side of your leather roll.

Tassel Earring for Crafts Unleashed by Amy Renea End Crimp Jewelry Findings

Step 6: Use your pliers to squeeze the endcap shut.  
You might want to use a tiny (tiny) dot of glue on the inside of the endcap to make sure it is secure.  Repeat on the other side.

Tassel Earring for Crafts Unleashed by Amy Renea Tighten End Crimps

Step 7:  Attach a jump ring to the two endcaps by opening it up all the way.  This is NOT the correct way to open a jump ring.  Typically, you open it side to side instead of wide like this so you do not weaken it.  To avoid opening the jump ring all the way, you could put together the hardware first and then attach the tassel (see below), but I found it much more cumbersome.  I decided a weaker jump ring was worth it in this case.

Tassel Earring for Crafts Unleashed by Amy Renea Findings Arrangement
If you are building your earrings from the pre-made tassels available at Consumer Crafts you simply add a jump ring between a fish hook or leverback.


So the question is whether or not to DIY the earring from scratch or use the premade Consumer Crafts tassels.  The tassels cost 1.77 for  2 sets, or 4 tassels, while leather costs just $1-2 for a large skirt, purse or jacket at the thrift store.  Add in the cost of the glue, fabric scissors and end crimps and you are at around $20.  If you already HAVE the glue and scissors, then your cost is less to DIY the earrings and of course you get a wider range of leather types and colors to choose from.  Totally up to you!  I think I might just do BOTH!
Pin It

2 COMMENTS:

Laura Murphy Saturday, June 14, 2014  

The best part is the price! Wow!

I hope leather accessories are here to stay....I love them.

Amy Renea Thursday, June 19, 2014  

I love them too! I hope they don't become overdone (AHEM antlers)...

Related Posts Plugin for WordPress, Blogger...
10 years buttonredbuds buttonwhat do you do button pppcalendar button
 
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------